facebookInstagramTikTokYou Tube
Sale

Front Runner Slimsport Roof Rack Kit Suitable for Toyota Hilux Dual Cab [2015-2021] (Kit) - KSTH003TBP

Brand:  Front Runner Product ID:  44283
SKU:  KSTH003TBP

MAY NOT BE SUITABLE FOR TOYOTA HILUX ROGUE AND SR5 CRUISER WIDE TRACK 2022 ONWARDS

Available Options
RRP:  $895.00
Special Price:  $859.00  (Kit)
SAVE:  $36.00

Supply Only Price.

-+
|

Please note: This kit does not suit a lightbar OR any models with a rear antenna. Please contact the sales team for any assistance.

Please see related products for the Slimsport Roof Rack with lightbar cutout

Gear up for all the activities Mother Nature has to offer with the Toyota Hilux DC (2015-Current) Slimsport Roof Rack Kit / Lightbar ready. It comes with a light bar-ready wind fairing, for all those late-night expeditions. This low-profile rack is compatible with most Front Runner accessories, so you can easily build the setup that’s right for your adventure.

  • This low-profile flat deck Slimsport rack has a load carrying area of 1272mmL (50.07") x 1135mmW (44.68").
  • The sleek side rails have integrated mounting feet. Mounting feet also have additional brace brackets for added strength.
  • The high-strength aluminum slats have top and bottom T-slots suitable for all Front Runner top mount accessories.
  • The included standard full fairing with rubber edge trim makes the rack ultra-quiet.
  • Fitment guide and all mounting hardware included.
  • 6"/T30 Torx Allen Key for Slimsport Rack is required for installation (sold separately).

Note: Drilling required.

Note: Under Rack Tables are not compatible with the Slimsport rack kit range.

Note: Some side mount accessories are not suited for low profile foot rails such as Hi-Lift Jack Bracket and Recovery Device & Gear Holding Side Brackets.

Front Runner Slimsport Roof Rack Kit Suitable for Toyota Hilux Dual Cab [2015-2021] (Kit) - KSTH003TBP

KSTH003TBP - Toyota Hilux DC (2015-2021) Slimsport Roof Rack Kit - by Front Runner


Consisting of:

1 x Toyota Hilux DC (2015-Current) Slimsport Roof Rack Kit

1 x RRAC232 - TOYOTA HILUX SLIMSPORT RACK WIND FAIRING

Fitting Intructions

Installation Hardware


Material Used:

Black epoxy powder - coated T6 aluminium

High strength steel


Assembled Rack Kit Dimensions:

1398mm (55“) L x 1141mm (44.9“) W x 106mm (4.2“) H


Approximate Installed Weight: 25.55kg (56.33lbs)


The t-slots on the tops and bottoms of the slats accommodate standard 8mm bolts.

To determine the approximate height from your vehicle’s roof to the top of your Slimsport Rack add 60mm-70mm (2.4"-2.8") to the highest point of your roof.


Shipping Dimensions:

Width: 325mm (13")

Length: 1700mm (67")

Height: 160mm (6")

Genuine/Non Genuine – Advertised parts are not genuine (unless specifically stated) and manufacturer references are for application purposes only. Only items that are specifically noted as Genuine OEM can be presumed as genuine parts.

Superior Engineering is not sponsored, approved, affiliated or otherwise associated with any genuine or original parts manufacturer, distributor or dealer.


Identification and Guidance Only – Photos are for identification purposes only and may be of either genuine or non-genuine parts.
All manufacturers names, symbols and descriptions on this website are used for reference purposes only, and it is not implied that any units or parts listed is the product of these manufacturers.

Original Equipment Manufacturer "OEM" part/reference numbers are listed for information/reference purposes only. Trademarks identifying these parts are those of each OEM and are the property of their owners and are not used, or authorized for use, by Superior Engineering. Cross-referenced parts from the Original Equipment Manufacturer "OEM" are listed for information purposes only.

Superior Engineering has no associations and/or claims to be associated with OEM Vehicle Manufacturers and their Companies worldwide. Any implied associations are purely coincidental and are not inferred. Superior Engineering is a supplier of fully interchangeable non-genuine spare parts (alternatives) for equipment produced by manufacturers using in accordance with law OEM Vehicle Manufacturers and their products, i.e. suspension parts, steering components, manufactured items, vehicle accessories etc. Alternative spare parts produced by Superior Engineering are manufactured according own technological documentation developed with the use of reverse engineering.
Vehicle Information
Lift Height0-2 inch|3 inch|4 inch|5 inch|6 inch|6 plus inch